Novastar MRV210-2 LED Receiver Card

Over 2500 USD5%
Over 5000 USD10%
  • Pixels supported: 256×220


Out of stock


Novastar MRV210-2 LED Receiver Card Specification

1)Single card outputs 16-group of RGB data;

2)Single card outputs 20-group of RGB data;

3)Single card outputs 24-group of RGB data;

4)Single card outputs 64-group of serial data, can be expanded to 128-group;

5)Single card support resolution 256×220 dots;

6)Support configuration file read back;

7)Support temperature monitoring.

8)Support Ethernet cable communication status detection;

9)Support power supply voltage detection;

10)Support high gray-scale high-refresh the high and low brightness mode refresh.

11)Support pixel by pixel brightness and chromaticity calibration.

12)Each of port has VCC PIN, the module can power supply to the control system;

13)Comply with EU CE-EMC standard.


Single card outputs
16-group of RGBR data20-group of RGB data24-group of RGB data64-group of serial data


MRV210-1Standard model, male connector on top
MRV210-2Male connector on bottom
MRV210-3Female connector on top
MRV210-4Female connector on bottom

Additional information

Weight2 kg

Share & Bookmark: